manualshive.com logo in svg

Cary Audio Design Cinema 12, Руководство пользователя, Страница: 41 / 72

Поделиться
Скачать
Cary Audio Design Cinema 12 Скачать руководство пользователя страница 41

MANUAL SOUND SETUP 

 

 

39

SET SPEAKER CONFIGURATION 

 
The first step in configuring the Cinema 12 to operate with your speaker system is to set 
the type, number and crossover frequencies of your particular loudspeakers. You make 
these selections using the SPEAKER SETUP menu shown below. 
 
NOTE: The following selected menus appear on the Cinema 12 display: 
 

SETUP MENU 
LISTENING 
PROFILES 

1.

 

Press the SETUP button to enter the SETUP menu. 
The “SETUP MENU / LISTENING PROFILES” menu appears on the front panel 
display. 
 

2.

 

Press the OK button on the remote to enter the “LISTENING PROFILES” setup 
menu. 
The “LISTENING PROFILES / MEMORY 1” appears on the front panel display. 
 

3.

 

Press the OK button on the remote to enter the “MOVIE / Set Speaker Config” 
settings menu.  The “MOVIE SPK Setting / Set Speaker Config” menu appears on 
the front panel display. 

 
4.

 

Press OK to enter the “Set Speaker Config” settings menu. 
The “Set Speaker Config / FL .... Yes” menu appears on the front panel display. 
 

5.

 

Use the 

 

and 

 

buttons on the remote to adjust the FL (front left) speaker 

configuration to either “Yes” or “No”.  

 

6.

 

Use the 

 and 

 buttons on the remote to cycle through the different speakers 

within the system. The following options are available for each group of speakers: 

 

•

 

For FL (Front Left) you can select Yes or No. Select No when the speaker 
setup does not include front L speaker. The Cinema 12 then redirects front L 
channel signals to the center output connectors. 

•

 

For CEN (Center) you can select Yes or No. Select No when the speaker 
setup does not include center speaker. The Cinema 12 then redirects center 
channel signals to the front L/R output connectors. 

•

 

For FR (Front Right) you can select Yes or No. Select No when the speaker 
setup does not include front R speaker. The Cinema 12 then redirects front 
R channel signals to the center output connectors. 

•

 

For SR (Surround Right) you can select Yes or No. Select No when the 
speaker setup does not include side R speaker. The Cinema 12 then redirects 
side R channel signals to the front R output connectors. 

Содержание Cinema 12









































































Отзывы:

Нет отзывов