manualshive.com logo in svg

Cary Audio Design Cinema 12, Руководство пользователя, Страница: 21 / 72

Поделиться
Скачать
Cary Audio Design Cinema 12 Скачать руководство пользователя страница 21

CONTROLS AND DISPLAYS 

 

 

19

FRONT PANEL 
 
 

 

 

 
 
1.

 

POWER 

 

• Press once to turn the power ON. 

 

• Press again to turn the power OFF. The Cinema 12 will enter STANDBY mode 

and the blue LED above the headphone jack will light. 

 

2.

 

HDMI INPUT SELECTOR 

 

• Press one of these buttons to select the HDMI input source. 

 
3.

 

INPUT SELECTOR 

 

• Press one of these buttons to select the audio input source.

 

 
4.

 

RADIO BAND (FM)/(AM)/(HDFM)/(HDAM) 

 

• Press this button to select between the FM, AM, HDFM & HDAM frequency 

bands. 

 

5.

 

TV SOUND (Audio Return Channel for HDMI) 

 

• Press this button to input the TV audio signal for TV.

 

 

6.

 

7.1 INPUT SELECTOR 

 

• Press one of these buttons to select the 7.1 channel audio input.

 

 
7.

 

PRO LOGIC IIx 

 

• Press this button to select either Pro Logic II decoding or Pro Logic IIx decoding

 

 

8.

 

SUR. MODE 

 

• Press this button to select the surround sound mode as part of Dolby Digital or 

DTS decoding; music or movie selections. 

 

Содержание Cinema 12









































































Отзывы:

Нет отзывов