Carver 46 VOYAGER, Руководство пользователя, Страница: 53 / 180

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
4627 5/04
2.2.2.25 Master Stateroom Head Fan
This breaker controls the flow of electricity to the exhaust fan switch in
the starboard head. To supply power to the switch, switch this breaker
“ON.”
2.2.2.26 Guest Stateroom Head Fan
This breaker controls the flow of electricity to the exhaust fan switch in
the port head. To supply power to the switch, switch this breaker “ON.”
2.2.2.27 Vent Fan
This breaker controls the flow of electricity to the vent fan switch in the
salon. The vent fan draws outside air into the salon. To supply power to the
switch, switch this breaker “ON.”
2.2.2.28 Pressure Water Pump
This breaker controls the flow of electricity to the fresh water system’s
pressure water pump. After the fresh water tanks are filled, switch this
breaker “ON” to activate the pressure water pump. Refer to the “Priming
the Water System” portion of Section 4 for information on using the
pressure water pump to fill and prime the water system.
2.2.2.29 Waste Pump
This breaker controls the flow of electricity to the waste pump switch for
the optional overboard discharge system. Use the waste pump to empty the
waste tanks directly overboard. The switch is located in the engine room
near the starboard forward bulkhead. Refer to the “Engine Room” portion
of Section 9 for the exact location of this switch. To supply power to the
switch, switch this breaker “ON.” Refer to the “Overboard Discharge”
portion of Section 4 for information on using the pump.
2.2.2.30 Washdown Pump
This breaker controls the flow of electricity to the optional bow and transom
raw water washdown pump. To activate the washdown pump, switch this
breaker “ON.” When you are finished using the washdown, turn the
washdown pump off by switching this breaker “OFF.” Refer to the “Raw
Water Washdowns” portion of Section 4 for information on using the
washdowns.
2.2.2.31 Trim Tab Pump
This breaker controls the flow of electricity to the trim tab controls at
both helms. Trim tabs are used to improve the running angle of your boat
while underway. Switch this breaker “ON” to activate the trim tab con-