Carver 46 VOYAGER, Руководство пользователя, Страница: 47 / 180

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
4627 5/04
2.2.1.4 Stereo Memory
This breaker controls the flow of electricity to the optional master state-
room stereo system. When the master stateroom stereo is installed, this
breaker should always be “ON” to maintain the information programmed
into the stereo’s memory. If this breaker is ever switched “OFF,” you will
have to reprogram the stereo. Refer to the OEM information for details on
programming the stereo.
2.2.1.5 Stereo Memory (Bridge)
This breaker controls the flow of electricity to the optional bridge stereo
system. When the bridge stereo is installed, this breaker should always be
“ON” to maintain the information programmed into the stereo’s memory. If
this breaker is ever switched “OFF,” you will have to reprogram the stereo.
Refer to the OEM information for details on programming the stereo.
2.2.1.6 High Water Alarm
This breaker controls the flow of electricity to the high bilge water alarm.
Refer to the “Bilge System” portion of Section 4 for a description of the
high bilge water alarm. This breaker must be “ON” whenever the boat is in
the water.
2.2.1.7 Electric Heads - Forward and Aft
These breakers control the flow of electricity to the vacuum pump for
each toilet. Switch these breakers “ON” to enable the pumps. Pressing
the foot lever at the base of the toilet then flushes the toilet. Refer to the
OEM information for details on operating the toilets.
2.2.1.8 Oil Changer
This breaker controls the flow of electricity to the optional oil change sys-
tem. This system is designed to assist you in changing the propulsion and
generator engine oil. Switch this breaker “ON” to enable the system.
The oil changer is located in the engine room on the port aft bulkhead.
Refer to the “Engine Room” portion of Section 9 for the exact location of
this sytem. Refer to the OEM information for details on operating the
system.
2.2.1.9 Electric Shift - Port and Starboard
These breakers control the flow of electricity to the electronic shift/
throttle levers at the helm. The port shift/throttle lever controls the port
engine; the starboard shift/throttle lever controls the starboard engine.
Switch these breakers “ON” to activate the shift/throttle levers. Refer to
5.7.1 Shift/Throttle Levers and the OEM information for details on
operating the shift/throttle system.