manualshive.com logo in svg

Carver Yachts 45 Voyager 2005, Руководство пользователя

Поделиться
Скачать
Carver Yachts 45 Voyager 2005 Скачать руководство пользователя страница 198

W

INTERIZATION

 

AND

 S

TORAGE

S

ECTION

 8

188

4527 10/99

c. Flush the heads until all water is drained from

the seawater pickup hoses.

d. Reconnect the seawater pickup hoses to the

seacocks. Leave the seacocks closed.

3. Below the boat, place a large bucket beneath the

overboard discharge fitting to collect antifreeze

pumped out later in this procedure. This fitting is

located in the aft bilge area just aft of the starboard

fuel tank.

You must use an approved antifreeze in your boat’s
sanitation system. Refer to the SeaLand Technical
Bulletin at the end of this section for information on
the proper type of antifreeze to use. Using the wrong
type of antifreeze can damage the sanitation system.
The repair of such damage is not included under the
terms of either the Carver Limited Warranty or the
sanitation system OEM’s warranty.

4. Purchase 20 gallons of nontoxic recreational vehicle

antifreeze.

5. Locate the waste tank selector valve on the engine

room’s forward bulkhead, forward of the starboard

engine. Position the valve to select the starboard

waste tank.

6. Flush 10 gallons of antifreeze through the master

stateroom (starboard) head.

7. Open the overboard discharge seacock located in

the aft bilge area just aft of the starboard fuel tank.

O

PEN

C

LOSED

Содержание 45 Voyager 2005









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды