Carver Yachts 380 SPORT Скачать руководство пользователя страница 9

Страница: 9 / 131

PREFACE

Using Your Owner’s Information Kit

Your Owner’s Information kit contains this Owner’s Guide and a set of manuals

referred to as “OEM information.” Please read the Owner’s Guide and OEM

information carefully and familiarize yourself with your boat before operating

the boat or any of its components or systems.

IMPORTANT:

The Owner

’

s Information kit must be onboard whenever your boat

is operated. If you sell your boat, make sure the new owner receives the entire kit.

Owner’s Guide

This guide explains how to safely operate and maintain your boat and its various

systems. The guide also contains safety precautions and operational tips, as

described below.

Describes a hazard that can cause death or severe injury if the

instructions are ignored.

Describes a hazard that can cause serious injury and/or property

damage if the instructions are ignored.

Describes a hazard that can cause damage to your boat or its

components if the instructions are ignored.

NOTE:

Provides important information that can help you avoid problems.

If this is your ﬁrst boat, or if you are changing to a type of boat you are not

familiar with, for your own comfort and safety, please obtain handling and

operation experience before operating the boat. Your dealer or national sailing

federation or yacht club can advise you of local sea schools or competent

instructors.

NOTE:

Drawings and illustrations contained within this guide are included as

graphic aids to assist in the general operation and maintenance of your boat. These

drawings and graphics do not include all details of each system and are not drawn to

scale. Do not reference these drawings to order parts or to service your boat. Contact

your authorized Carver Dealer for any parts or service required for your boat.

The information contained in this Owner’s Guide was complete and accurate at

the time the guide was printed. Carver reserves the right to change materials,

part numbers, speciﬁcations, or system designs at any time without notice.

A TIP FROM CARVER!

There are many people within the Carver organization who are avid boaters.

Some of the experience gained during our years of boating are presented in this

Owner's Guide. This information is presented like this and is entitled “A TIP FROM

CARVER.”

3327 • P2 6/06

Содержание 380 SPORT




































































































































Результаты поиска

Содержание 380 SPORT

Отзывы:

Carver Yachts 380 SPORT, Руководство пользователя, Страница: 9 / 131

Результаты поиска

Содержание 380 SPORT

Отзывы: