Carver Yachts 380 SPORT Скачать руководство пользователя страница 47

Страница: 47 / 131

3327 • P2 6/06

AC ELECTRICAL SYSTEMS

SECTION 3

AC Control Center

The AC Control Center, located in the second cabinet on the port side next

to the entertainment center, manages the power supply to all of the boat’s AC

equipment. To provide power to this breaker panel, ﬁrst provide a source of AC

power to the boat, either through a shore power connection or the generator, as

described earlier in this section. The AC Control Center contains the gauges and

circuit breakers described below.

A/C Unit

This breaker controls the ﬂow of electricity to the air conditioning unit and its

water pump.

Do not switch the A/C Unit breaker “ON” until after you have opened the

seacock that supplies the air conditioning system with seawater. Refer to

Section 4 - Air Conditioning System for more information.

Battery Charger 1

This breaker controls the ﬂow of electricity to the battery charger that maintains

the voltage levels in the engine and accessory batteries. Switch this breaker

“ON” to supply power to the battery charger. Refer to the OEM information

for details on operating the battery charger.

Battery Charger 2

This breaker controls the ﬂow of electricity to the battery charger that maintains

the voltage level in the generator’s battery. Switch this breaker “ON” to supply

power to the battery charger. Refer to the OEM information for details on

operating the battery charger.

Icemaker

This breaker controls the ﬂow of electricity to the optional icemaker located in

the cockpit. Switch this breaker “ON” to supply power to the icemaker. Refer to

the OEM information for details on operating the icemaker.

Microwave

This breaker controls the ﬂow of electricity to the galley’s microwave oven

and integral coﬀeemaker. Switch this breaker “ON” to supply power to

the microwave. Refer to the OEM information for details on operating the

microwave oven and coﬀeemaker.

AC CONTROL CENTER

Содержание 380 SPORT




































































































































Результаты поиска

Содержание 380 SPORT

Отзывы:

Carver Yachts 380 SPORT, Руководство пользователя, Страница: 47 / 131

Результаты поиска

Содержание 380 SPORT

Отзывы: