Cartoni Malibu 540 2014, Руководство пользователя

Страница: 72 / 136

110-0001-04EN
58
7
Electrical system
4. Plug the connection coupling (Fig. 42, Pos. 3) into the power supply of
the pitch.
5. Switch on main circuit breaker of vehicle.
6.
Check function on control panel (Fig. 44).
→ If the power supply is unstable or not present after connecting, contact the
operator of the pitch.
7.2.3 Cutting off the external power supply
Disconnecting the external power supply:
1. Switch off main circuit breaker of vehicle.
2. Unplug cables and lines of external power supply.
3. Unplug cables and lines at vehicle connection.
4.
Close cover of vehicle connection (if present).
7.3 12 V on-board electrical system
If the Malibu box-type van is not connected to the 230 V supply voltage or the
230 V supply voltage is switched off, the living area battery supplies the living
area with 12 V DC voltage. When the vehicle engine is running, the living
area battery and the starter battery are charged by the vehicle alternator.
The living area battery only has a limited supply of energy. This is why elec-
tric consumers should not be operated without 230 V supply voltage for
longer periods.
During heating operation, the circulating air blower is switched on and off by
a thermostat controller. As a result, the living area battery is loaded if the 230
V supply voltage is not connected.
7.3.1 Terms
Open-circuit voltage
The open-circuit voltage is the voltage of the battery in idle state, this means
that current is not use nor is the battery being charged.
Deep discharge
→ Deep charging damages the batteries.
Deep discharge of the battery is at threat when the battery is completely dis-
charged by consumers switched on and by open-circuit voltage.