Cartoni Malibu 540 2014 Скачать руководство пользователя страница 109

Страница: 109 / 136

110-0001-04EN

Care

11.1.4

Care and maintenance of exterior applications

→

Exterior applications are wash-proof and must be cleaned in the same

manner as the Malibu box-type van..

→

Do not clean exterior applications with solvents.

11.1.5

Cleaning the chrome parts

To clean the chrome parts, use the following cleaning agents:

•

Stainless steel & chrome gloss polish made by Rot/Weiss

11.2

water tank

The water tank and supplementary tanks cannot be completely emptied via

the drain taps. This could lead to the formation of germs.

Water tanks, if the vehicle is parked for longer periods, either

• dry manually via the cleaning opening

•

use recommended care agent (e.g., from Multiman)

11.3

Waste-water tank

Clean the waste water tank after using the Malibu box-type van each time.

• Empty waste-water tank
• Thoroughly rinse out the waste water tank with fresh water.
•

In event of contamination on the waste water sensor, clean carefully by

hand.

The coating of the sensor rod must not be damaged in the process.

•

Recommended care agent, for example, Dr. Keddo or Multiman.

11.4

Entrance step

→ If the entrance step is lubricated, coarse particles of dirt can settle on the

lubricant during the journey and impair or cause damage to the operating

mechanism of the entrance step. Therefore, do not lubricate the moving

parts of the entrance step.

Содержание Malibu 540 2014









































































































































Результаты поиска

Содержание Malibu 540 2014

Отзывы:

Похожие инструкции для Malibu 540 2014

Бренды по названию

Популярные бренды

Cartoni Malibu 540 2014, Руководство пользователя

Результаты поиска

Содержание Malibu 540 2014

Отзывы:

Похожие инструкции для Malibu 540 2014

Бренды по названию

Популярные бренды