Cartoni Malibu 540 2014, Руководство пользователя

Страница: 118 / 136

110-0001-04EN
104
12
Maintenance
12.4 Changing the bulbs on the rear light moulding
→ If the tool or a nut falls down when undoing the rear light moulding, you can
reach the parts via an opening in the underfloor at the rear.
The opening on the underfloor can be accessed on the vehicle from out -
side. It is sealed with a cover.
12.4.1 Undoing the rear lamp at the driver’s side (high bed)
→ The openings for the nuts (Fig. 75, Pos. 1) are located in the vehicle pillar
behind the insulation (Fig. 75).
– The top nut is located in the opening direct under the bed plate.
– The bottom nut is located underneath that in the opening.
10800105
1
1
Rear light nut
Fig. 75 Rear light, driver’s side
1. Open the rear wing doors.
2. Remove protective caps.
3.
Remove screws (PH1 or PZ1 screwdriver).
4. Remove cover strip.
5.
Using a 17 mm socket, a joint and a ratchet, undo both nuts (Fig. 75,
Pos. 1) and remove them.
6. Continue in chapter “12.4.5 Changing the bulbs on the rear light mould-
ing” on page 107.
→ Upon reinstallation tighten nuts (Fig. 75, Pos. 1) and screws hand-tight.
Returning to the original state is carried out in reverse order.