Cart-Tek GRI-1500Li, Руководство пользователя

Страница: 9 / 19

Page 9 of 19
POWERING YOUR GRI-1500LI
Place your battery into the battery tray and plug battery cable into the
caddy. Always press the silver spring lock on battery cable when
inserting and removing battery cable from caddy. If the round plug at
the end of the cable becomes loose, re-tighten. (see previous picture)
When you first connect the battery to the caddy, the BLUE LED on the
handle will slowly flash. This is “Standby” mode. Push and hold the
button on the end of the handle until the BLUE LED is solid.
PUTTING YOUR TROLLEY INTO MANUAL MODE
•
Turn speed dial back to zero – counter clockwise.
•
Press the On/Off button twice – Blue light will single flash in
manual mode – standby state, or double flash in manual mode
operating state.
•
Rotate speed dial clockwise to increase the speed of caddy.
•
Rotate speed dial counter-clockwise to decrease the speed of the
caddy.
•
In manual mode there are three ways to stop your caddy.
ü
Turn the speed dial backwards, to zero.
ü
Push the On/Off button on the end of the handle.
ü
Push the “Stop” button on the remote control.
•
To resume use in manual mode, either press the on/off switch to
resume the currently set speed, or turn the speed dial back to zero
and then turn the speed dial clockwise to the desired speed.