Cart-Tek GRI-1500Li, Руководство пользователя

Страница: 13 / 19

Page 13 of 19
Store personal speeds ( NO need to go into program mode)
•
Choose your desired speed with remote up and down buttons for
the speed you are setting. Press and hold the number you want to
set it (i.e. #1) to until the LED turns solid blue, then without
releasing the numbered button, press and hold the stop button
until the blue LED turns off. The cart will come to a stop first, then
the LED on the remote will turn off.
•
Button is now set to new speed.
Adjust Tracking I.e. Caddy trails off to one side or the other on flat
ground. Electronically adjust tracking only after adjusting bag
weight. (Instructions for front wheel axle adjustment are in the
troubleshooting section, “my caddy does not track in a straight
line”, later in this manual).
•
Go into Program Mode.
•
To adjust the caddy to the left, press ‘left’ button once. Or to
adjust the caddy to the right, press the ‘right’ button once. Two
button presses adjusts the tracking about one foot to either side,
in a 25-foot run.
•
To save the setting, push the ‘Parking Brake’ button.
•
Test the caddy to see if you need further adjustment. Repeat as
needed.
For the instructions below that say “go into program mode”,
follow these instructions:
Press both speed 1 and speed 2(green buttons) until blue LED
double flashes to get into programming mode. The cart will move
forward at a slow speed at this time.
If the cart does not move, repeat as your caddy is not yet in
program mode.