G
32
Format SD Card
LiPo Battery Charging
Insert your SD card into the transmitter. The transmitter can format
your SD card. Press down the ELEVATOR stick for 1 second to enter
setting status, move the stick up/down to choose FORMAT SD CARD,
push the ELEVATOR stick to the right, move it up/down to choose
and push right to conrm or exit. Hold down the ELEVATOR stick for 2
seconds to exit.
WARNING! ALWAYS FORMAT AND ACTIVATE CAMERA RECOR-
DING BEFORE FLIGHT!
1 The quadcopter is equipped with a LiPo battery. 3.7 V 1-cell
380 mAh LiPo battery.
1.1 The LiPo battery supplied is in the fuselage of the Quadcopter.
Remove the LiPo battery from the model.
2 Connect the flight battery to the USB charger connection.
The indicator lamp on the USB plug glows and goes out when the
charging process is completed. Never leave the battery and
charger unattended during charging; after charging disconnect
the battery from the charger!
3.7V 240mAh
3.7
V
38
0m
Ah