G
39
Mounting the Cage
In the subsequent steps, the correct assembly of the propeller safety cage.
1
2
Removing Props
Hold the prop, insert the U wrench under the prop, press down and
the prop will easily come o the motor shaft.
Mounting the Cage
Remove the props. Position the cover’s four holes with the motors.
Press each of them on the motors, then re-install the props in their
correct positions on the X4 . When removing the protection cover,
please remove the props rst as in the above steps, and pinch o the
protection cover from each motor. After any crash landing, please
check to make sure the protection cover is still on tight, and make sure
the body, motors and props are not damaged.
