GB
// 6
TecHnicaL DaTa
500606073 charger:
input voltage:
~230 V 60Hz
Type of battery:
NiMh / NiCd
number of cells:
4 cells (4,8 V)
Power output:
3 W
Maximum charging current:
400 mA
automatic cut-off:
no
charging procedure
• Plug the ac adapter into a standard wall socket (230V) – the
power LED glows green
• Connect the charging plug with the charging socket on the
model/transmitter (observe the correct polarity) - LED glows
red: Battery is charging
• Charging time depends on battery capacity (no automatic
deactivation of the charging device!!!)
• After the charging procedure has finished, remove the charging
plug from the model/transmitter
• Remove the ac adapter from the wall socket after charging
Please follow below safety notes otherwise the charger and the
battery can be damaged violently.
• Do not keep it in an environment below 5°C or above 50°C.
• Keep away the charger from dust, damp, rain, heat, direct suns-
hine and vibration. Do not drop it.
• This charger should be used on a heatresistant, nonflammable
and nonconductive surface. Never place it on a car seat, carpet
or similar.
• Do not apply the voltage & current higher than the require-
ments by the manufacturer of the battery.
• Double check if the battery count and type match your charger
settings.
• Never disassemble or alter the charger.
• Do not attempt to charge/discharge nonrechargeable batteries
or damaged batteries with the charger.
• Keep the charger far away from children. Never leave the char-
ger unsupervised, when it is connected to its power supply.
SaFeTy PrecauTionS
