Carrol Touch TouchSystems CarrollTouch Prog, Руководство программиста

Страница: 99 / 274

Chapter 7 - CTKERN CARROLL TOUCH
7-12 Touch System Programmer’s Guide
Message:
The CALIB.DAT file contains multiple
default calibrations.
Meaning:
CALIB.DAT
contains more than one default calibration.
Message:
The CALIB.DAT file does not contain a
default calibration.
Meaning: The calibration data file contains no default calibration.
Message:
The CALIB.DAT file is invalid.
Meaning: The calibration data file does not contain the string
Carroll Touch Calibration Data File
as
its first line of text.
Message:
The calibration parameters of the
following calibration entry in
CALIB.DAT are too large for the touch
system currently being used (the sum
of the offset value and span value is
greater or equal to the frame size in
one or both axes):
(followed by the bad calibration entry)
Enter a Y to truncate the X and/or Y
span values to the frame size so that
this entry is valid for the touch
system being used and continue loading
CTKERN. Press any other key to abort
CTKERN installation.
Meaning: A calibration entry has parameters too large for the touch
system being used.
Press the Y key to truncate the value and continue to load.
You must truncate all out of range calibration entries for
CTKERN to load. The truncation applies only to the
CTKERN driver resident in memory; the
CALIB.DAT
file is not modified. Run
CALIB.EXE
to modify the
CALIB.DAT
file so it contains calibration entries that
are correct for the touch system in use.
Press any key other than Y to abort CTKERN and display
the bad calibration entry.
Table 7-1. CTKERN Error Messages (Continued)