Carrol Touch TouchSystems CarrollTouch Prog, Руководство программиста, Страница: 104 / 274

CARROLL TOUCH Chapter 7 - CTKERN
Touch System Programmer’s Guide 7-17
Calibrate Other Video Modes
Press the O key to perform a calibration for a video mode for which
CALIB.EXE
cannot display calibration target screens. The first Other
Video Mode screen appears, as shown in Figure 7-9, and prompts you
to take several steps.
Figure 7-9. Calibration Other Video Mode Screen #1
After completing these four steps, the second Other Video Mode screen
appears, as shown in Figure 7-10, and prompts you to take several
steps.
Figure 7-10. Calibration Other Video Mode Screen #2
To calibrate to a video mode that CALIB cannot
display calibration target screens for, take
the following steps:
Press ESC to exit this screen, then
exit from this program.
Display a full screen image in the
video mode to be calibrated for and
mark the upper left and lower right
corners of the image with tape
Enter this calibration program again,
select the calibration table entry
to be updated, and select “other
video mode” to return to this screen.
Press C to continue the calibration
process.
1)
2)
3)
4)
Enter the BIOS video mode number: 3
Enter “T” if this is a text mode, “G” if this is a
graphics mode: T
Enter the X resolution for this video mode: 640
Enter the Y resolution for this video mode: 480