TC17C
36 22 520-02 ()
3
To avoid danger the damaged mains supply cable
should be replaced only by the manufacturer or
qualified service person.
Replacement of fluorescent tube
Loosen the 2 screws holding the lightbox assembly.
Before starting the replacement, mark the glass with
a piece of adhesive tape or similar to make sure the
glass is remounted with the correct side facing
down. (The LE-layer must be pointing down.)
Loosen the 2 screws holding the LE-glass placed on
the bottom of the light box.
Carefully bend up the plate edges (with holes for
screws), which holds the LE-glass. (If plate edge
brakes off it can be remounted by positioning it to its
original place. There is no need for replacing the
entire lightbox)
Lift the glass carefully.
Loosen the fluorescent tube by carefully twisting it.
Be sure to replace it with equivalent ones.
Remount in reversed order.
Содержание TULIP TC17C-SA
Страница 8: ...TC17C 36 22 520 02 4 1 2 3 4 6 1 6 2 5...