To set up the driver
Zone Ctrl II and
VAV Zone II Secondary Duct Installation and Start-up Guide
CARRIER CORPORATION ©2019
Error! No text of specified style in document.
41
All rights reserved
Act Net Network Details
Act Net Statistics
The actuator serial numbers are automatically read and filled in by the i-Vu® application. Only those devices that
are physically connected or in the control program will show in the table.
NOTE
See
To get the Carrier Zone Ctrl II serial number
(page 44) for the controller serial number.
The
Act Net
network can have the 3 devices listed below with the following addresses:
Address
1
: The Zone Ctrl II’s actuator
Address
2
: A VAV Zone II Secondary Duct's actuator
Address
3
: A VAV Zone II Secondary Duct's sensor
CAUTION
If you see
Duplicate address on network
or
No communication with device
under
Device Status
,
contact Carrier Control Systems Support. Do not use
Act Net Address Setting
unless directed by Carrier Control
Systems Support.
