Carrier AQUAZONE 50PSH, Инструкция по установке, запуску и обслуживанию

Страница: 63 / 64

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53500144-01 Printed in U.S.A. Form 50PS-6SI Pg CL-1 8-22 Replaces: 50PS-5SI
50PSH,PSV START-UP CHECKLIST
(Remove and use for job file.
CUSTOMER: __________________________ JOB NAME:________________________________________
MODEL NO.: __________________________ SERIAL NO.:______________ DATE: __________________
I.PRE-START-UP
Does the unit voltage correspond with the supply voltage available? (Y/N)
Have the power and control wiring connections been made and terminals tight? (Y/N)
Have water connections been made and is fluid available at heat exchanger? (Y/N)
Has pump been turned on and are isolation valves open? (Y/N)
Has condensate connection been made and is a trap installed? (Y/N)
Is an air filter installed? (Y/N)
II. START-UP
Is fan operating when compressor operates? (Y/N)
If 3-phase scroll compressor is present, verify proper rotation per instructions. (Y/N)
UNIT VOLTAGE — COOLING OPERATION
Phase AB Volts Phase BC Volts Phase CA Volts
(if 3 phase) (if 3 phase)
Phase AB Amps Phase BC Amps Phase CA Amps
(if 3 phase) (if 3 phase)
CONTROL VOLTAGE
Is control voltage above 21.6 volts? (Y/N) .
If not, check for proper transformer connection.
TEMPERATURES
Fill in the analysis chart attached.
NOTE: To avoid injury to personnel and damage to equipment or
property when completing the procedures listed in this start-up
checklist, use good judgment, follow safe practices, and adhere to
the safety considerations/information as outlined in preceding
sections of this Installation, Start-Up, and Service Instructions
document.
COAXIAL HEAT
EXCHANGER
COOLING CYCLE:
FLUID IN F FLUID OUT F PSI FLOW
HEATING CYCLE:
FLUID IN F FLUID OUT F PSI FLOW
AIR COIL COOLING CYCLE:
AIR IN F AIR OUT F
HEATING CYCLE:
AIR IN F AIR OUT F