Carrier AquaForce 61XWHZE, Руководство по управлению

Страница: 20 / 52

20
5 - USER INTERFACE: MENU STRUCTURE
QCK_TST1 – Quick Test 1 (continued)
No. Name Status Default Unit Displayed text* Description
29 Q_ALARM off/on - - Alarm Relay Status Alarm relay status
30 Q_ALERT off/on - - Alert Relay Switch Alert relay switch
31 Q_DEXV_A 0 to 100 0 % DGT EXV Position A DGT EXV position, circuit A (100% = EXV fully open)
32 Q_DEXV_B 0 to 100 0 % DGT EXV Position B DGT EXV position, circuit B (100% = EXV fully open)
33 Q_3W_VLV 0 to 100 - % 3 way valve position 3-way valve position
*Depends on the selected language (English by default).
IMPORTANT: To enable the Quick Test functionality, the unit
must be stopped (Local off mode).
Trendings
No. Name Status Unit Description
1 GENUNIT_CTRL_PNT - % Control point
2 TEMP_COOL_EWT - °C/°F Cooler entering fluid
3 TEMP_COOL_LWT - °C/°F Cooler leaving fluid
4 TEMP_COND_EWT - °C/°F Condenser entering fluid
5 TEMP_COND_LWT - °C/°F Condenser leaving fluid
6 TEMP_SCT_A - °C/°F Saturated condensing temperature, circuit A
7 TEMP_SST_A - °C/°F Saturated suction temperature, circuit A
8 TEMP_SCT_B - °C/°F Saturated condensing temperature, circuit B
9 TEMP_SST_B - °C/°F Saturated suction temperature, circuit B
10 INPUTS_CURREN_A - AMPS Motor current, circuit A
11 INPUTS_CURREN_B - AMPS Motor current, circuit B
12 EXV_CTRL_EXV_A - % EXV position, circuit A
13 EXV_CTRL_DSH_A - ^C/^F Discharge superheat, circuit A
14 EXV_CTRL_ov_exv_a - - EXV override, circuit A
15 EXV_CTRL_EXV_B - % EXV position, circuit B
16 EXV_CTRL_DSH_B - ^C/^F Discharge superheat, circuit B
17 EXV_CTRL_ov_exv_b - - EXV override, circuit B
18 EXV_CTRL_eco_sha - ^C/^F Economizer superheat, circuit A
19 EXV_CTRL_ov_eco_a - - EXV override, circuit A
20 EXV_CTRL_eco_shb - ^C/^F Economizer superheat, circuit B
21 EXV_CTRL_ov_eco_b - - EXV override, circuit B
22 LOADFACT_cap_t_a - % Actual capacity, circuit A
23 LOADFACT_cap_t_b - % Actual capacity, circuit B
24 LOADFACT_smz - % Load/unload factor
25 LOADFACT_over_cap - - Active capacity override
*Depends on the selected language (English by default).
OPT_STA – Software Options
No. Name Status Unit Displayed text* Description
1 opt5 no/yes - OPT5: Medium Brine Not applicable to this unit
2 opt6 no/yes - OPT6: Low Brine Not applicable to this unit
3 opt149 no/yes - OPT149: BACnet
Parameter set to “yes” means that BACnet option which requires the
Software Key is activated (see also section 6.19)
4 opt149B no/yes - OPT149B: Modbus
Parameter set to “yes” means that Modbus option which requires the
Software Key is activated (see also section 6.20)
5 opt295 no/yes - OPT295: Fast Capacity Recovery Not applicable to this unit
*Depends on the selected language (English by default).