13
• In areas with poor air circulation, such as behind a door or in an
alcove.
4.3.2. Wired Remote Room Sensors
A Remote Room Sensor can be used with the Infinity System Control to
take the place of the control’s internal temperature sensor. This allows the
Infinity System Infinity System Control to be mounted in areas with less
than optimal airflow (such as near an exterior door, window or in a
closet). The remote sensor can be wired to the terminal block connectors
labeled S1 and S2 at the control’s backplate, or the ZS1 and ZS1C
connection at the Damper Control Module. In either case, the Infinity
System Control will automatically detect the Remote Room Sensor and
ignore its internal temperature sensor.
NOTE:
Humidity sensing will occur ONLY at the Infinity System
Control. The wired Remote Room Sensor does NOT have humidity
sensing capability.
4.3.2.1. Wired Remote Room Sensor Averaging
Typically, one wired remote sensor is used but, multiple wired sensors
may be used and averaged in some applications. Averaging requires a
special series-parallel wiring method with a specific number of sensors.
See figure below. It is also important to note the humidity sensor cannot
be remotely located, so do not locate the Infinity System Control in an
area where humidity sensing may not be accurate.
Содержание A170203A
Страница 2: ...2 ...
Страница 79: ...79 A13242C A180093 Connected Not Connected ...
Страница 88: ...88 A160170 NIM Chart ...
Страница 90: ...90 A07114 G Input Wiring for Blower Operation R G FE Fan Coil or Variable Speed Furnace ...