Carrier 53QDMT 12 Скачать руководство пользователя

Страница: 6 / 44

( 3 )

3. TIPS OF ENERGY SAVING AND OPTIMUM COMFORT LEVEL

Adjust economical setting temperature for cooling mode in summer for energy
saving and optimum comfort level.

•

Keep room temperature to comfort levels.

•

Don’t remain in direct contact with cold air for a long period. This is harmful to health.

•

Don’t wait until it is too hot. Turn the air conditioner for cooling before that.

•

Don’t exaggerate on the temperature intensity, too cold.
Extreme temperatures are harmful to your health and waste energy.

Wireless Control Wired Control

Adjust economical setting temperature for heating mode in winter for energy saving
and optimum comfort level.

•

Keep room temperature to comfort levels.

•

Don’t remain in direct contact with warm air for a long period. This is harmful to health.

•

Don’t wait until it is too cold. Turn the air conditioner for heating before that.

•

Don’t exaggerate on the temperature intensity, too hot.
Extreme temperatures are harmful to your health and waste energy.

Wireless Control Wired Control

Содержание 53QDMT 12













































Результаты поиска

Содержание 53QDMT 12

Отзывы:

Похожие инструкции для 53QDMT 12

Бренды по названию

Популярные бренды

Carrier 53QDMT 12, Руководство пользователя

Результаты поиска

Содержание 53QDMT 12

Отзывы:

Похожие инструкции для 53QDMT 12

Бренды по названию

Популярные бренды