( 11 )
USE OF WIRED CONTROLLER (Cont.)
DRY MODE
START
1. Press MODE button to select
mode
on the wired controller display.
2. Press TEMP buttons or ,
to select the set temperature
the wired controller display.
Set desired temperature
between 17°C to 30°C .
3. Press ON/OFF button to start
the air conditioner.
OPERATION lamp on the
display panel will light on
DRY mode starts after
approximately 3 minutes.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
•
In DRY mode, you can not switch the indoor fan speed.
The indoor fan speed will be automatically selected AUTO.
•
The DRY mode will automatically select the drying operation based on the
difference between the set temperature and the actual room temperature.
•
The temperature is regulated while dehumidifying by repeating turning on
and off of the cooling operation or fan only.
•
In DRY mode, you can not operate ECO function.
2
2
1
3
