Carrier 53QDMT 12 Скачать руководство пользователя

Страница: 16 / 44

( 13 )

USE OF WIRED CONTROLLER (Cont.)

ECO Function

ECO

function is useful when you go to sleep.

Carrier air conditioner automatically controls the selected temperature and consequently controls the

room temperature to avoid overcooling or overheating and to have comfortable and healthy sleep.

ECO function with COOL Mode

If you want to operate

ECO

function with Cool mode to save energy and maintain the most comfortable

temperature during COOL mode, apply the following steps :

Start:

Press

ECO

button to activate

ECO

function.

•

The fan speed will automatically change to low speed.

•

The set temperature will be automatically increased by 1°C

after 1 hour after

COOL

mode is selected.

•

Then the set temperature will be automatically increased by

another 1°C after additional 1 hour.

•

This new temperature will be maintained.

Stop:

If you want to cancel

ECO

function, Press

ECO

button again.

ECO function with HEAT Mode

If you want to operate ECO function with Heat mode to save energy and maintain the most comfortable

temperature during HEAT mode, apply the following steps :

Start:

Press

ECO

button to activate

ECO

function.

•

The fan speed will automatically change to low speed.

•

The set temperature will be automatically decreased by 1°C

after 1 hour after

HEAT

mode is selected.

•

Then the set temperature will be automatically decreased by

another 1°C after additional 1 hour.

•

This new temperature will be maintained.

Stop:

If you want to cancel

ECO

function, Press

ECO

button again.

NOTES:

ECO

function is only available with

COOL

HEAT

and

AUTO

mode.

2. When activating

ECO

function in

AUTO

mode, the set temperature will be automatically increased by

1°C after

AUTO

mode is selected.

If it is under cooling mode, the temperature will decrease 1°C, if it is under heating mode, the set

temperature will be changeless.

ECO function with COOL mode

ECO function with HEAT mode

Содержание 53QDMT 12













































Результаты поиска

Содержание 53QDMT 12

Отзывы:

Похожие инструкции для 53QDMT 12

Бренды по названию

Популярные бренды

Carrier 53QDMT 12, Руководство пользователя

Результаты поиска

Содержание 53QDMT 12

Отзывы:

Похожие инструкции для 53QDMT 12

Бренды по названию

Популярные бренды