( 10 )
USE OF WIRED CONTROLLER (Cont.)
AUTO MODE
START
1. Press MODE button to select
mode
on the wired controller display.
2. Press TEMP buttons or
to select the set temperature
on the wired controller display.
Set desired temperature
between 17°C to 30°C .
3. Press ON/OFF button to start
the air conditioner.
OPERATION lamp on the
display panel will light on
AUTO mode starts after
approximately 3 minutes.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
1.
In the AUTO mode, the air conditioner can logically choose the
mode of Cooling, Fan only or Heating operation by sensing the difference between
the actual room temperature and the set temperature on the unit control panel.
2. In the AUTO mode, you cannot switch the fan speed. It has already been automatically controlled.
3. If the AUTO mode is not comfortable for you, the desired mode can be selected manually.
4. In AUTO mode, you can operate ECO function.
2
2
1
3
