6
PRODUCT OVERVIEW (52M)
This section summarizes product features covered in detail in later sections of this manual.
FRONT
PANEL
INDOOR
COIL
BASEPAN
DISCHARGE
GRILLE
WIRE SCREEN
BI-MOLDED
CONDENSER
SHROUD
COIL TUBE
SHEETS
INDOOR-AIR
FILTERS
ACCESSORY
WALL
SLEEVE
ACCESSORY
OUTDOOR
GRILLE
DIGITAL CONTROL PAD
W/ELECTRONIC DISPLAY
WALL THERMOSTAT
AND ENERGY MANAGEMENT
INTERFACE
CONFIGURATION
DIP SWITCHES
Accessory Power Cord
S
Accessory Power Cord or Hardwire Kit
(required)
-- Select correct power cord or
hardwire kit to match voltage and amperage of
electrical circuit.
S
Polymer, Metal or Extended Wall Sleeve
--
Designed for rugged duty, acoustic absorption,
and attractive appearance for years to come.
S
Rotary Compressors
-- Provide quiet, reliable
operation.
S
Copper Tube Aluminum Fin Coils
-- Enhanced
coils provide durability, high performance, and
ease of operation.
S
Fresh Air Control Arm
-- Allows outdoor air into
room through vent filter for improved air quality.
S
Control Door
-- Provides protection for controls
and enhances appearance.
S
Improved Condensate Removal
-- Minimizes
condensate water on outside of building.
S
New Two--Piece Filter Design
-- Provides
improved air filtration and can be removed easily
for cleaning.
S
Louvered Front Panel
-- Made of high impact
polystyrene. Provides improved performance and
quiet operation.
S
Bi--Molded Condenser Shroud
-- The two--piece
condenser shroud allows easy access for service
and maintenance to the outdoor coil and other
components.
S
Digital Control Pad with Electronic Display
--
Easy to select: mode, fan speed and set point with
an easy to read electronic display. In
_
F or
_
C.
S
Configuration Dipswitches
-- Setup the system
perfect for the exact application.
S
Wall Thermostat Interface
-- A terminal block
for wiring up a wall thermostat that is easy to wire
to and is easy to remove.
S
EM (Energy Management) Interface
-- A plug
for tying to an Energy Management system or
Front Desk Control. Easy to wire to and easy to
remove.
52M