20
FIELD--INSTALLED ACCESSORIES (CONT.)
SUBBASE
Part No.: SUBBASE--230V--15A
Part No.: SUBBASE--230V--20A
Part No.: SUBBASE--230V--30A
Part No.: SUBBASE--265V--15A
Part No.: SUBBASE--265V--20A
Part No.: SUBBASE--265V--30A
Part No.: SUBBASE--NON--ELEC
Part No.: LEVELING--LEGS
This decorative subbase supports the unit and is
available in three basic models: non--electrical,
electrical, and hardwired.
A subbase (or leveling legs) is required for
installations where the wall sleeve extends 4 or more
inches into the room or the wall is less than 2 in.
thick. The minimum clearance between the bottom of
the sleeve and the floor is 3--1/4 in., and the
maximum clearance is 5--1/2 inches.
IMPORTANT: All standard cord--connected
265--v
PTAC
units
will
require
a
field--installed electrical subbase accessory
per UL and NEC electrical codes.
All subbase models are pre--assembled, mount to the
wall sleeve, and come with adjustable legs and side
skirting to provide a finished appearance.
Non-Electrical Subbase
The easy to install, non--electrical subbase provides
mechanical support and requires no wiring.
Non--Electrical Subbase Assembly
Electrical Subbase
The electrical subbase has a factory--installed
electrical junction box containing a receptacle for
corded packaged terminal air conditioner (PTAC)
units. The electrical subbase series offers models
from 230--v, 15 amp up to 265--v, 30 amp. Knockouts
are provided for power source connections.
Electrical Subbase Assembly
52M