D
C
B
Then follow the routing shown in the figures below.
Cable routing for management
(CMS) or room sensors.
Power supply cable
route
W115 model
When wiring via management systems (CMS) or master/slave control, as well as room sensors, go through the top of the cabinet and
the top section of the box, through the grommets shown in the box views.
In all cases, avoid following the power supply cables
, to avoid interference to the signals sent.
Recommendations concerning the cables and routing in the box.
For the c
o
mmunications cables:
• RS485 BUS cable: Multiconductor shielded jacketed cable (shielding with braiding)
- BUS RS485
ca
ble for MODBUS or master/slave communication.
- BACNET BUS
cable for BACNET communication (see BACNET specification)
For the room
sensor cables
:
Multipolar shielded cables with 3 to 5 wires, and a maximum cross-section of 1.5 mm
2
.
Please refer to the control manual and electrical diagram for more details concerning connection.
10 - CONNECTIONS
46
