Carrier 40VU007-0182-7G-QEE, Инструкция по установке и эксплуатации, Страница: 12 / 169

1 Pipe cover 1 For gas pipe
2 Pipe cover 4 For liquid pipe
3 Strap 4 For pipe cover
1 Flat washer (M10) 4 For unit suspension
2 Paper pattern 1
3 Bolt 4 For paper pattern of installation
1 Pipe cover 2 For drainage pipe
2 Drainage pipe 1
3 Flexible hose clip 1 For drainage pipe
Installation Procedures
Before installation
Make correct operation according to the manual when installation.
Please confirm the below information:
• If operation plan has been discussed;
• Model, power supply specs;
• Pipe, wire, and the other parts;
• Accessories (inside the unit, take it out after opening the filter)
For drainage pipe
For unit suspension
Selection of installation location for the indoor unit
Indoor units should be installed in places with the environment of even circulation of cool and
warm blowsThe following places should be avoided.
• Places with high salinity (beach), high sulfureted gas (such as the thermal spring regions where
copper tubes and soft soldering are easy to be eroded), much oil (including mechanical oil) and
steam;
• Places where organic substance solvent is used; where special spray is frequently used;
• Places where machines generate the high frequency electromagnetic wave (abnormal condition
will appear in the control system);
• Places where there is high humidity exists near the door or windows (dew is easily formed).
Warning:
Protect the machine from gales or earthquake, make the installation according to the regulations.
Improper installation will cause accidents due to the overturn of the air conditioner.
English
6
Heat insulation for nut on flared section