manualshive.com logo in svg

Carrier 30RQM 160, Инструкции по установке, эксплуатации и обслуживанию, Страница: 55 / 62

Поделиться
Скачать
Carrier 30RQM 160 Скачать руководство пользователя страница 55

55

10.8 - Other options

Options

No.

Description

Advantages

Use

Corrosion protection, 

traditional coils

3A

Fins made of pre-treated aluminium (polyurethane and epoxy)

Improved corrosion resistance, recommended for moderate 

marine and urban environments

30RQM/30RQP 

160-520

Low-temperature brine 

solution

6B

Low temperature chilled water production down to -8°C 

with ethylene or propylene glycol

Covers specific applications such as ice storage and 

industrial processes

30RQP

180-230-270-310

Unit equipped for air 

discharge ducting

12

Unit equipped with high static variable-speed fans (maximum 

200 Pa), each fan equipped with a connection flange allowing 

the connection to the ducting system.

Ducted fan discharge, optimised condensing or evaporating 

temperature control, based on the operating conditions and 

system characteristics

30RQP 160-520

Low noise level

15

Aesthetic and sound absorbing compressor enclosure

Noise level reduction by 1 to 2 dB(A)

30RQM/30RQP 

160-520

Very low noise level

15LS

Aesthetic and sound absorbing compressor enclosure associated 

with low-speed fans

Noise level reduction for sensible site

30RQP 160-520

IP54 control box

20A

Increased leak tightness of electrical box

Protects the inside of the electrical box from dusts and sand. In 

general this option is recommended for installations in polluted 

environments

30RQM/30RQP 

160-520

Protection grilles 

23

Metallic protection grilles 

 Coil protection against possible shocks 

30RQM/30RQP 

160-520

Enclosure panels

23A

Side enclosure panels at each end of the coil

Improves aesthetics, coil and piping protection against impacts. 30RQM/30RQP 

160-520

Soft Starter

25

Electronic starter on each compressor

Reduced start-up current

30RQM/30RQP 

160-520

Winter operation down to 

-20°C

28

Fan speed control of lead fan for each circuit using a variable 

frequency drive

Stable unit operation for outside air temperature from 0°C down 

to -20°C in cooling mode

30RQM 160-520

Water exchanger frost 

protection

41

Electric heater on the water exchanger and the water piping

Water exchanger module frost protection between 0°C and -20°C 

outside air temperature

30RQM/30RQP 

160-520

Exchanger & hydraulic  frost 

protection

42A

Electric heater on the water exchanger hydronic module and 

optional expansion tank

Water exchanger and hydraulic module frost protection between 

0°C and -20°C outside air temperature

30RQM/30RQP 

160-520

Partial heat recovery

49

Partial heat recovery by desuperheating of the compressor 

discharge gas.

Free high-temperature hot-water production simultaneously with 

chilled and hot-water production

30RQM/30RQP 

160-520

Master/slave operation

58

Unit equipped with supplementary water outlet temperature 

sensor kit to be field-installed allowing master/slave operation of 

two units connected in parallel

Optimised operation of two heat-pumps connected in parallel with 

operating time equalisation

30RQM/30RQP 

160-520

Compressor discharge 

valves

93A

Shut-off valve on the compressor discharge piping

Simplified maintenance

30RQM/30RQP 

160-520

HP single-pump hydronic 

module

116R

Single high-pressure water pump, water filter, electronic water 

flow control, pressure transducers. See hydraulic module option 

chapter

Easy and fast installation (plug & play)

30RQM/30RQP 

160-520

HP dual-pump hydronic 

module

116S

Dual high-pressure water pump, water filter,  electronic water 

flow control, pressure transducers. See hydraulic module option 

chapter

Easy and fast installation (plug & play)

30RQM/30RQP 

160-520

LP single-pump hydronic 

module

116T Single low-pressure water pump, water filter,  electronic water 

flow control, pressure transducers. See hydraulic module option 

chapter

Easy and fast installation (plug & play)

30RQM/30RQP 

160-520

LP dual-pump hydronic 

module

116U

Dual low-pressure water pump, water filter, electronic water 

flow control, pressure transducers. See hydraulic module option 

chapter

Easy and fast installation (plug & play)

30RQM/30RQP 

160-520

HP variable-speed single-

pump hydraulic mod.

116V

Single high-pressure water pump with variable speed drive (VSD), 

water filter,  electronic water flow control, pressure transducers. 

Multiple possibilities of water flow control. See hydraulic module 

option chapter

Easy and fast installation (plug & play), significant pumping energy 

cost savings (more than two-thirds), tighter water flow control, 

improved sytem reliability

30RQM/30RQP 

160-520

HP variable-speed dual-

pump hydraulic mod.

116W

Dual high-pressure water pump with variable speed drive (VSD), 

water filter, electronic flow switch, pressure transducers. Multiple 

possibilities of water flow control. See hydraulic module option 

chapter

Easy and fast installation (plug & play), significant pumping energy 

cost savings (more than two-thirds), tighter water flow control, 

improved sytem reliability

30RQM/30RQP 

160-520

J-Bus gateway

148B Two-directional communication board complying with JBus 

protocol

Connects  the  unit  by  communication  bus  to  a  building 

management system 

30RQM/30RQP 

160-520

Lon gateway

148D Two-directional communication board complying with Lon Talk 

protocol

Connects  the  unit  by  communication  bus  to  a  building 

management system 

30RQM/30RQP 

160-520

Bacnet over IP gateway

149

Two-directional high-speed communication using BACnet 

protocol over Ethernet network (IP)

Easy and high-speed connection by ethernet line to a building 

management system. Allows access to multiple unit parameters

30RQM/30RQP 

160-520

Energy Management 

Module

156

Control board with additional inputs/outputs. See Energy 

Management Module option chapter

Extended remote control capabilities (Set-point reset, ice storage 

end, demand limits, boiler on/off command...)

30RQM/30RQP 

160-520

Conformance with Russian 

regulations

199

EAC certification

Conformance with Russian regulations

30RQM/30RQP 

160-520

Compliance with Australian 

regulations

200

Unit approved to Australian code

Conformance with Australian regulations

30RQM/30RQP 

160-520

Coil defrost resistance 

heaters

252

Electric heaters under the coils and the condensate pans

Prevents frost formation on the coils; compulsory in the heating 

mode, if the outdoor is below 0°C

30RQM/30RQP 

160-520

Welded water exchanger 

connection kit

266

Victaulic piping connections with welded joints

Easy installation

30RQM/30RQP 

160-520

230V electrical plug

284

230V AC power supply source provided with plug socket and 

transformer (180 VA, 0,8 Amps)

Permits connection of a laptop or an electrical device during unit 

commissioning or servicing

30RQM/30RQP 

160-520

Safety hydraulic 

components, evap. side

293

Screen filter, expansion tank and relief valve integrated in the 

evaporator hydronic module

Easy and fast installation, operating safety

30RQM/30RQP 

160-520

Welded desuperheater 

BPHE water connection kit

303

Victaulic piping connections with welded joints for the 

desuperheater exchanger

Easy installation

30RQM/30RQP 

160-520

Screwed desuperheater 

BPHE water connection kit

304

Victaulic piping connections with screwed joints for the 

desuperheater exchanger

Easy installation

30RQM/30RQP 

160-520

Set point adjustment by 

4-20mA signal

311

 Connections to allow a 4-20mA signal input

Easy energy managment, allow to adjust set point by a 4-20mA 

external signal

30RQM/30RQP 

160-520

Содержание 30RQM 160































































Отзывы:

Нет отзывов