Carparelli Infiniti C-ZE1, Руководство по эксплуатации

Страница: 6 / 14

10 11
Using the Rhythm Function (Rhythm Mode)
Using the Rhythm Function (Rhythm Mode)
Set the Module selector to the "RHYTHM" position.
The number of the currently selected rhythm pattern
(01 – 40) appears on the display.
Also while in rhythm mode, you can use the patch that
was selected immediately before switching the mode.
However, reverb effects are disabled in rhythm mode.
The rhythm function can also be used in play mode.
Press the RHYTHM [ / ] key.
R P
Rhythm pattern playback will start also if you press the
RHYTHM [ / ] key in play mode. However,
R P
changing the rhythm pattern or adjusting the rhythm
volume and tempo is not possible.
To switch between the 40 built-in rhythm patterns,
press body the body toggle switch up and down
(For information on pattern contents, see page 26.)
When you press the body toggle switche in rhythm
mode, the C-ZE1 switches to the bypass/mute
condition. The tuning function ( p. 10) can be used in
this condition while playing the rhythm pattern.
Select rhythm mode
Start the rhythm function
Select a rhythm pattern
This section describes how to use the built-in rhythm function that plays realistic drum sounds in
various patterns.
Turn the [VALUE] knob.
The current setting (0 – 30) is shown briefly on the
display.
Press the RHYTHM [ / ] key.
R P
The C-ZE1 returns to the previous condition.
The rhythm pattern tempo can be adjusted in the
range of 40 – 250 BPM (beats per minute).
• To continuously change the tempo
Hit the [BANK UP·TAP] key once and then turn
the [VALUE] knob while the tempo value is being
shown on the display.
• To manually specify the tempo
Hit the [BANK UP·TAP] key at least twice in the
desired interval. The C-ZE1 automatically
detects the interval in which the key is pressed the
second and subsequent times, and sets the tempo
accordingly (tap tempo function).
While the above steps are carried out, the new tempo
value (40 – 250) is shown briefly on the display. For
values in the range from 100 to 199, a dot is shown in
the center, and for values of 200 and above, dots are
shown in the center and in the bottom right corner.
With the C-ZE1, using the body togge switch
to manually adjust the tempo is also possible ( p. 18).
The C-ZE1 does not support use of a foot switch.
Adjust the rhythm volume
Stop the rhythm
Adjust the tempo
HINT
HINT
HINT
Rhythm pattern
number
Push once
HINT
Dot is shown
Tempo = 120 BPM
Dots are shown
Tempo = 240 BPM
Detected automatically
4
1
2
5
6
3