Carparelli Infiniti C-ZE1, Руководство по эксплуатации

Страница: 4 / 14

6 7
Selecting a Patch for Playing (Play Mode)
Selecting a Patch for Playing (Play Mode)
Bank
name Patch
number
The volume control on the connected amplifier
should be turned down.
When using the unit on batteries
Plug a shielded cable into the [INPUT] jack.
When using the unit with an AC adapter
Plug the cable from the adapter into the [DC IN]
jack.
Turn the guitar amplifier on and adjust the volume
to a suitable position.
Set the Module selector to "PLAY".
The bank and patch number are shown on the display.
Immediately after turning the C-ZE1 on, the unit
will be in play mode, regardless of the position of the
Module selector.
Turn power on
Set the C-ZE1 to play mode
Directly switch a bank
Adjust the master level
Press the [BANK UP·TAP] key.
Repeatedly pressing the key cycles through banks in
the order A ... d, 0 ... 3, A.
With the C-ZE1, using the toggle switch (Bt01) to switch
banks is also possible ( p. 18).
Operate the [VALUE] knob.
The master level setting appears on the display.
The master level setting applies to all patches. The
setting range is 0 – 98, 1.0. It will be reset to 80 when
power is turned off and then on again.
When using headphones, this knob adjusts the listening
volume.
Select a patch
Use the Bank Up / Tap & Body Toggle.
Press the Bank Up switch or toggle up to call up the
next higher patch.
Press down the toggle switch to call up the next
lower patch.
Repeatedly pressing Bank Up button cycles through
patches in the order A0 – A9 ... d0 – d9, 00 – 09 ...
30 – 39,
This section explains basic functions of the play mode.
A0.
HINT
HINT
HINT
3
1
2
4
5
Aux In