caron 6105, Руководство по эксплуатации

Страница: 10 / 34

Model 6105 Operations ManualH Rev M 07-16-182/14/2021 Page 10 of 34
Power Requirements
The power cord of this chamber is equipped with a grounded plug. Be sure to connect the ground.
CARON recommends that the chamber have a dedicated wall outlet. Verify correct power supply
required for particular unit. (Nema 6-15 15A Cord, Model 6105-2 only.)
(CEE 7/7 Continental European 16A Cord, 6105-3 only)
Water Connections
Plumb the water drain connection to a facility drain. Connect the water inlet to a
water supply. The chamber requires
distilled, reverse osmosis or deionized water
with resistivity between 0.05 & 1 Mega Ohm-cm and pH above 6.5. Using water
outside this range will void the warranty.
Door Heat and Light Connection
Locate the connection input on the bottom right of the door . Be sure the
corresponding yellow connector is properly inserted . Note: The black shroud on the
yellow connector must be pulled back for insertion and then pushed forward once
connected to lock.
Carboy water bottle: BTL101 (optional)
Mount the universal carboy holder either on the top of the chamber or on the side
(as shown below). Use the mounting screw holes provided and secure the holder.
Connect tubing to carboy, fill bottle and install as shown. The water supply must
gravity drain. The bottle cap must have a weep hole for it to work properly.
Connect the unit to a dedicated grounded outlet
that matches the units power requirements.
Failure to do so could result in electrical shock or
Universal
carboy holder
Water inlet to
chamber (supply)
Carboy
Water outlet
from chamber
(drain)