CarNetix PSU-PC12, Инструкция по установке и эксплуатации

Страница: 7 / 25

CarNetix PSU-PC12 V1.1 Installation Manual
2.0 Installing the PSU-PC12
2.1 Before You Begin
Before you begin the installation, make sure you take the time to read through these instructions.
The PSU-PC12 is a sophisticated, microprocessor-based device. Please read these instructions
carefully and contact us either in our Support Forum (
www.carnetix.com/forum ) or via email
( support@carnetix.com ) if you have any questions or problems.
It is assumed that you have a basic to advanced understanding of electronics. It would be helpful,
and is highly recommended (especially if you plan to get much further involved in CarPCs) that you
purchase, as a minimum, a simple VOM (volt-ohm meter) or DMM (Digital Multi-Meter). These
devices are inexpensive (starting around $20) and will save you and me a great deal of time. They
can be purchase over the web or at your local retail electronics store (Radio Shack, Home Depot,
some hardware stores, some auto parts stores).
Whether you plan to use the on-board Startup/Shutdown Controller (SSC) or not, please read the
section describing its operation first, before attempting to install the PSU-PC12. The SSC will affect
the power turn-on and turn-off operation whether you use its features or not.
Installation of the PSU-PC12 consists of :
•
Setting the Jumpers
•
Connecting the Wires.
- 7 -