CarNetix PSU-PC12, Инструкция по установке и эксплуатации

Страница: 4 / 25

CarNetix PSU-PC12 V1.1 Installation Manual
1.0 PSU-PC12 Installation Instructions
NOTE: This manual and feature set apply to Rev 1.0 and above of the printed circuit board (PCB).
The PCB revision number is printed on the top of the PCB in white lettering. Please make sure you
are using the correct manual for the correct product revision.
1.1 Overview
The PSU-PC12 is a 90 watt intelligent DC-DC power regulator designed to provide safe, reliable
power to the Xenarc SC3.
Figure 1 CarNetix PSU-PC12
The PSU-PC12 provides two outputs. The primary output is +12V and can provide up to 6.3 amps
(75 Watts). The secondary output is +5V to power USB devices (such as the Audigy 2NX sound
USB sound card) with up to 3 amps (15 Watts). The PSU-PC12 can accept battery input as low as 7
volts under full load (90 watts) during cranking while providing a well-regulated output so that your
Xenarc SC3 does not crash.
- 4 -