CarNetix PSU-PC12, Инструкция по установке и эксплуатации

Страница: 22 / 25

CarNetix PSU-PC12 V1.1 Installation Manual
PSU-PC12 Operation States
Normal Operation
PSU Output LED1 LED2 State Description
OFF OFF OFF Idle State
PSU is idle and waiting for ignition/accessory switch to be
turned on. It is monitoring battery voltage during this time.
ON Fast Blink OFF Run Delay State
PSU is on and waiting for output voltages to stabilize before
turning on Xenarc SC3
ON ON ON Bootup Lockout
PSU is on and has sent ACPI pulse to motherboard. No
changes can occur until after boot period. This time period is
jumper selectable at either 30 sec (boot from hibernation) or 60
sec (full boot).
ON ON OFF Run State
PSU is on and motherboard is running. No faults have been
detected.
ON BLINK10%* OFF Shutdown Delay
PSU is waiting before going into shutdown cycle. This delay
period is jumper selectable for 6 sec (default) or 1min. After this
delay PSU goes into shutdown Lockout state.
ON BLINK50%* OFF Shutdown Lockout
PSU is in the process of shutting down and has sent ACPI pulse
to motherboard. No changes can occur until after shutdown
lockout period (same as Boot Lockout period, 30sec or 60sec,
jumper selectable). After Shutdown Lockout state, PSU shuts
down power and goes into Idle State, waiting for IGN/ACC to be
turned on.
- 22 -