Carlton SP8018 TRX, Руководство пользователя, Страница: 35 / 101

SP8018 TRX MACHINE CONTROLS
15
FLOW CONTROL
•
Flow control affects how fast the
machine travels. High flow is for
moving the machine from one place to
another very quickly. Low flow is used
for more precision in tight places or
when positioning the cutter wheel close
to the stump. For further control of the
ground speed in low flow use the ground
speed control knob. The machine must
be in low flow for the cutter head
positioning functions to operate. The
machine flow switch must be in LOW to
start the radio transmitter.
•
To operate from the radio transmitter,
toggle the Gear/Flow switch down once
for HIGH Flow and down a second time
for LOW Flow.
GEAR CONTROL
•
Gear control affects both the travel speed
and track motor torque. In high gear the
machine moves faster with less track
motor torque. In low gear the machine
will travel slower with more track motor
torque. Use low gear in situations where
more climbing power and track motor
torque are needed. The machine gear
switch must be in LOW to start the radio
transmitter.
•
To operate from the radio transmitter,
toggle the Gear/Flow switch up once for
HIGH Gear and up a second time to go
to LOW Gear.
•
When the transmitter is shut down (E-
Stop), the Gear/Flow switch goes to low.
GEAR
FLOW/GEAR
COMBINATIONS
LOW HIGH
LOW
Slowest Speed
High Torque
Medium Speed
Low Torque
FLOW
HIGH
Medium Speed
High Torque
Fastest Speed
Low Torque
Use Ground Speed Adjustment control to fine tune
travel speed in low flow mode.
TO OPERATE GEAR FROM TRANSMITTER,
TOGGLE THE SWITCH UP ONCE FOR HIGH AND UP
A SECOND TIME FOR LOW
TO OPERATE FLOW FROM TRANSMITTER,
TOGGLE THE SWITCH DOWN ONCE FOR HIGH
AND DOWN A SECOND TIME FOR LOW
FLOW GEAR