Carlton SP8018 TRX, Руководство пользователя, Страница: 30 / 101

SP8018 TRX DAILY CHECKLIST
10
•
Check engine oil at dipstick. Engine
must be level. Boom in raised position
will not affect the engine position,
machine must be on level ground. Add
recommended oil, as required.
(See
Engine Owners Manual)
•
Inspect dry air filters. REPLACE, if
necessary, WITH FACTORY AIR
FILTER ONLY. Do not blow out or tap
on ground. Replace inner safety filter
when dirty or when the outer air filter
has been changed 3 times. Do not blow
out the inner safety filter or tap on
ground. (See Engine Assembly section
for part numbers.)
•
Check fuel filter for debris or water.
Replenish fuel tank with fresh fuel.
•
Check condition and tightness of drive belts.
(See Servicing Belts section)
New belts
will stretch and become loose as
machine runs. Check belt tension often
when belts are new.
•
Check hydraulic oil level. A sight glass
is located on the tank.
Add oil if
required. In hot weather do not fill
window full, the
oil will expand and spill
out.
•
Check for any loose, broken or missing
teeth and pockets.
•
Inspect bolts, hydraulic fittings, wiring
harnesses, hoses, and equipment for
tightness, wear, or leakage. Replace if
necessary.
•
Grease jackshaft and boom bearings
daily, apply only 2 to 4 shots of grease.
Do not over grease.
•
Cutter wheel shaft bearings must be
purged with grease daily. Purge until
clean grease is seen.
•
Check the condition of the tracks and adjust
tension if necessary (see Maintenance
section).
CUTTER WHEEL BEARINGS
ENGINE LEVEL