6
GB
Operation
Fill the iron with water as described above.
•
Place the iron on its heel on the ironing board rest and connect
•
the mains cable to the mains socket.
The
•
Temperature Indicator
will illuminate.
Select the correct temperature by turning the
•
Temperature Dial
.
Turn clockwise to increase and anticlockwise to reduce
temperature.
Note:
Some parts have been lightly greased and the iron might smoke slightly when
switched on for the first time. After a short while, this will cease. We recommend
passing the iron over a clean cotton cloth before using it for the first time. The
Temperature Indicator
will go off when the indicated setting reaches the correct
temperature. The iron is now ready for use. During use the indicator will light on and
off as the thermostat maintains the iron at the correct temperature setting.
Do not fill the iron above the max mark indicated on
the side of the iron.
Filling the Iron
Make sure the iron is unplugged from the mains socket and the
Steam Control
is at Steam
0
position.
Open the
Water Filler & Cap
, tip the iron up slightly and fill it
carefully with fresh water using the supplied filler cup.
If you live in a hard water area, it is advisable to use distilled or
de-mineralised water. Avoid using water containing softeners,
perfumes or additives.
MAX
MAX
MAX
MI
N
DECREASE
INCREASE
