Page |
9
Carlson Software
DRAFT
Hold the battery so that the black tab on the front edge of the battery is up
and facing the door latch (this tab helps you pull the battery out). Place the
back edge in first, gently pushing it underneath the two battery catches.
Rotate the front edge down until it is in position.
CAUTION:
Do not insert the battery pack straight down. Damage to the
unit could occur.
4. Replace the door and press down on it until the latch pops into the
locked position.
5. Attach the appropriate plug for your country into the AC wall charger
and plug it into a wall socket. Plug the other end into the DC power
jack on the RT4.
Note:
Use the AC wall charger that came with the RT4 or another
approved charger from Carlson Software.
6. Charge the battery pack at room temperature (68°F or 20°C) for 6
hours (for the first charge). While the battery pack is charging, the red
LED blinks. When it is fully charged and external power is applied, the
red LED is solid.
Note on optional internal battery: the RT4 does not recognize an
internal battery until the RT4 is being charged.
Product Overview
Black Tab
Содержание Rugged Tablet RT4
