Carlson Rugged Tablet RT4, Руководство пользователя

Страница: 42 / 66

42 | Page
Carlson RT4 User Manual
How to Use the Dock
How to Use the
Dock
1. Attach the mounting system to the vehicle. Plug the 12 V charging
cable into the vehicle power port, and then into the dock.
2. If a hand strap is covering the pin contacts on the RT4, unhook one
end or remove it.
3. Hold the RT4 horizontally with the docking pin contacts facing down.
Place it over the dock alignment pins and press down until you feel
and hear the lock engage.
4. Press the lock bar down until it engages the RT4.
5. Push the lock button in. The RT4 is now locked in the dock and cannot
be accidentally removed.
6. To remove the RT4, turn the key until the lock button pops out. Lift
the lock bar, and remove the RT4.
Battery Charger
The Battery Charger is an optional accessory, allowing you to charge spare
battery packs for the RT4.
How to Use the Battery Charger
Batteries charge best at room temperature (about 68°F or 20°C). Batteries
will not charge (or might charge slowly) at temperatures below 32°F (0°C)
or above 122°F (50°C).
Power the Battery Charger by using the AC wall charger provided with your
RT4. Slide the battery pack into the battery charger, orienting it so that the
battery contacts meet the charging contacts in the battery charger. The red
LED flashes slowly, indicating that the battery pack is charging.
LED Indicator
The LED indicates the charging status:
• Solid, on: The battery pack is fully charged.
• Blinking (slow): The battery pack is charging.
• Off: There is no power. The battery is not charging.
Battery Charger