CARLO GAVAZZI
SAFETY AND WARRANTY INFORMATION
INSTALLATION
Designed for use:
UL873 - only in products where the acceptability is determined by Underwriters Laboratories
Inc.
EN61010-1 / CSA 22.2 No 1010.1 - 92
To offer a minimum of Basic Insulation only.
Suitable for installation within Catagory II and III and Pollution Degree 2.
SEE ELECTRICAL INSTALLATION
Page 19
It is the responsibility of the installation engineer to ensure this equipment is installed as
specified in this manual and is in compliance with appropriate wiring regulations.
CONFIGURATION
All functions are front selectable, it is the responsibility of the installing engineer to ensure that
the configuration is safe. Use the program lock to protect critical functions from tampering.
ULTIMATE SAFETY ALARMS
Do not use SP2/SP3 as the sole alarm where personal injury or damage may be caused by
equipment failure.
WARRANTY
CARLO GAVAZZI warrant this product free from defect in workmanship and materials for three
(3) years from date of purchase.
1
Should the unit malfunction, return it to the factory. If defective it will be repaired or
replaced at no charge.
2
There are no user-servisable parts in this unit. This warranty is void if the unit shows
evidence of being tampered with or subjected to excessive heat, moisture, corrosion
or other misuse.
3
Components which wear, or damage with misuse, are excluded e.g. relays.
4
CARLO GAVAZZI shall not be responsible for any damage or losses however caused, which
may be experienced as a result of the installation or use of this product.
CARLO GAVAZZI liability for any breach of this agreement shall not exceed the purchase
price paid E. & O.E.
Copyright CARLO GAVAZZI 2001
Not to be reproduced without prior written permission from CARLO GAVAZZI. Whilst
every effort has been made to ensure the accuracy of the specifications contained in
this manual, due to our policy of continuous development, CARLO GAVAZZI reserves
the right to make changes without prior notice.
23
