How to install a Sx2WEB system
34
1.7 Micro SD
The IP address can be changed by using a
“Micro SD” or “SDHC” memory card correctly inserted into
the relevant slot (see Sx tool software manual).
N.B: the maximum capacity of the Micro SD card is 16GB.
1. Open the flap located on the Sx2WEB24 front panel. Identify the slot specifically designed for the
insertion of the “Micro SD” memory card.
2. Insert the Micro SD card, making sure it is not write-protected and it is correctly formatted (FAT32).
3. Close the flap. Warning: if the flap is not properly closed Sx2WEB24 will not enable any writing or
reading operation (flap closing is verified by a micro switch located under the flap).
4. As soon as the flap is closed, Sx2WEB24 will install the newly inserted memory card and update the
IP address. Warning: opening the flap during the writing stage will stop the data transfer process and
may potentially damage the Micro SD memory.
