CARLO GAVAZZI RSGD, Руководство пользователя, Страница: 43 / 52

43
LSB11 00h MSB11 00h
LSB12 75h MSB12 0Ch
LSB13 00h MSB13 80h
LSB14 20h MSB14 08h
LSB15 48h MSB15 49h
LSB16 00h MSB16 20h
* Two hexadecimal digits represent one byte.
Step 4: By using the conversion formula convert each byte to display information of the respective start.
Code Variable Description
A Start number The start number to which the data belongs
B System voltage & phase sequence The system voltage and phase sequence during power-up
C Ramp-up time Ramp-up time setting
D Initial firing angle The initial firing angle at which the SCR turned on
E Current balancing setting Variable related to current balancing algorithm
F Spare Reserved
G Alarm reset mode Auto or manual alarm reset setting
H Phase sequence alarm mode Phase sequence alarm setting
I Motor overload alarm mode Motor overload alarm setting
J Current Limit Setpoint The value of current limit
K Ramp-down time Ramp-down time setting
L FLC setting Full load current setting
M Max IL1 during ramp-up The maximum current measured on phase 1 during ramp-up
N
Max IL2 during ramp-up
The maximum current measured on phase 2 during ramp-up
O Max IL3 during ramp-up The maximum current measured on phase 3 during ramp-up
P HP mode Indicates if start was done in HP
Q Time to reach full speed The time duration that the motor took to reach full speed
R Time to reach continuous current
The time duration that the device took to reach continuous
current
S Max IL1 during bypass The maximum current measured on phase 1 during bypass
T Max IL2 during bypass The maximum current measured on phase 2 during bypass
U Max IL3 during bypass The maximum current measured on phase 3 during bypass
V Torque on leaving bypass
The measured torque when the soft starter entered into
ramp-down mode
W Ramp-down duration The time duration that the soft starter took to stop the motor
X
Max IL1 during ramp-down
The maximum current measured on phase 1 during ramp-down
Y Max IL2 during ramp-down The maximum current measured on phase 2 during ramp-down
Z Max IL3 during ramp-down The maximum current measured on phase 3 during ramp-down
AA NTC temperature (max)
The maximum internal temperature measured by the
temperature sensor
AB Junction temperature The maximum junction temperature
AC Estimated motor temperature
The temperature of the motor based on measurement of the
current consumed
AD Soft starter status after stopping The soft starter status after ramp-down