❑
Set SMS messagges and telephone numbers
If the “AR1041 module with GSM modem for SMS (Master)”
in the window “Instrument composition...” has been select-
ed, the above window will appear to enable the setup of the
SMS alarm messages to be sent to the phone numbers
typed in the relevant list.
[1]
Select which alarms or events are activated to send SMS
messages.
[2]
Select a 3-digit password for the identification of PQT-90
when an SMS is received or some information are request-
ed (see “useful information” on page 56).
[3]
List of line phone numbers for SMS: type the phone
numbers to which the messages are to be sent.
[4]
SMS messages for alarm activation: type the messages
to be sent when the alarms are activated (there’s a max.
number of characters available terminated which the user
will not be allowed to continue typing the message).
Configuration
How to use SMS messages
32
56
31
PQTSoft Remote
PQTSoft Remote
30
Configuration
8
[5]
SMS messages for alarm deactivation: type the mes-
sages to be sent when the alarms are deactivated (there’s a
max. number of characters available terminated which the
user will not be allowed to continue typing the message). In
any case, the user who will receive the message on his
mobile phone will be able to read not only the preset text,
but also date and hour relating to the event.
Max. 5 GSM phone numbers can be typed; the
instrument will send the same SMS activation
and/or deactivation message to all the listed num-
bers.
3
4
1
2
5
