Eos –Gate Installation and operation manual
All the information provided with this document are property of Carlo Gavazzi Controls SpA
22
7.3 A10 - Checking RS-485 connectivity for Eos-Array / Eos-Array Lite
1
Use case name
Checking RS-485 connectivity for Eos-Array
2
Use case ID
A10
3
Description
This use case covers the check for Eos-Array / Eos-Array Lite
connectivity
4
Use case goal
The Eos-Array / Eos-Array Lite devices are successfully connected to
the Eos-Gate
5
Primary actors
Eos-Gate, User’s PC, Eos-Array / Eos-Array Lite
6
Secondary actors
RS-485
7
Pre-conditions
•
Step A5 OK
•
Eos-Array / Eos-Array Lite correctly configured according to the
relevant guidelines
•
Eos-Gate connected to the RS-485 bus of the Eos-Array / Eos-
Array Lite
8
Post-conditions
Success end conditions:
•
The Eos-Gate communicates with the Eos-Array / Eos-Array
Lite devices
Failure end conditions:
•
The Eos-Gate cannot communicate with the Eos-Array / Eos-
Array Lite devices
9
Trigger
10
Scenario description
•
Using the Eos-Gate configuration manager, open the Eos-Array
tab
•
Configure the relevant RS-485 parameters
•
Start the “Discover Eos Array” action
•
Compare the “Device List“ with the real configuration of the
system
•
According to the comparison, go to the following step
11
Special
requirements
12
Information
