Carl Valentin Spectra II, Руководство по обслуживанию

Страница: 31 / 76

Spectra II Adjustments, settings and alignments
09.16 Service Instructions 31
6 Adjustments, settings and alignments
DANGER!
Risk of death via electric shock!

Before opening the housing cover, disconnect the
device from the mains supply and wait approx. 2 - 3
minutes until the power supply unit has discharged.
6.1 Adjusting the print mechanism
Major adjustment of the printing mechanism beyond format-based
settings is only required if the printhead assembly has been removed
or parts in this area have been replaced. Excluded from this is the
replacement of the printhead, after which readjustment is generally
not required.
The following print quality imperfections may indicate maladjustment
of the printing mechanism:

Print image too light

Print image is spotty

Print image lighter on one side

Horizontal lines not parallel to the horizontal label edges

Clear lateral drift of the transfer ribbon
NOTICE!
Print image errors can also arise from wrinkling of the transfer
ribbon. This is why the transfer ribbon feed path and the head
locking system should be checked before making adjustments
to the printing mechanism (see
'operating manual' ).
Adjustment of the printing mechanism encompasses the following
procedures in the order specified:
1. Adjust position of printhead (see chapter 6.2, page 32).
2. Adjust the ribbon feed path (see chapter 6.4, page 36).
3. Adjust the ribbon rewinder/unwinder (see chapter 6.5, page 37).
4. Adjust the printhead photocell (see chapter 6.6, page 38).