Carl Valentin COMPA II, Руководство по эксплуатации

Страница: 101 / 116

Compa II Error Correction
03.20 Operating manual 101
Error message Cause Remedy
103 Start signal
Print order is active but device
not ready to process it. Check start signal.
104 No print data
Print data outside the defined
label.
Selection of wrong module type
(design software).
Check selected module type.
Check selection of left/right
version.
105 Printhead
No original printhead is used. Check the used printhead.
Contact your distributor.
106 Invalid Tag type
Wrong Tag type.
Tad data do not match the Tag
type in the printer.
Adapt data or use the correct
Tag type.
107 RFID inactive
RFID module is not activated.
No RFID data can be
processed.
Activate RFID module or
remove RFID data from label
data.
108 GS1-128 invalid
Transferred GS1-128 bar code
is invalid. Verify bar code data (see GS1-
128 bar code specification).
109 EPC parameter
Error at EPC calculation. Verify data (see EPC
specification).
110 Housing open
When starting the print order
the housing cover is not closed. Close the housing cover and
start the print order anew.
111 EAN.UCC code
Transferred EAN.UCC code is
invalid. Verify bar code data (see
corresponding specification).
112 Print carriage
Printing carriage does not
move. Check gear belt (possibly
broken).
113 Applicator error
Option applicator:
Error while using applicator.
Check applicator.
114 Left position
Option applicator:
Left final position switch is not
in correct position.
Check LEFT final position
switch for correct function and
position.
Check function of pneumatics
for cross traverse.
115 Right position
Option applicator:
Right final position switch is not
in correct position.
Check RIGHT final position
switch for correct function and
position.
Check function of pneumatics
for cross traverse.
116 Print position
Option applicator:
The applicator is not in the print
position when trying to print a
label.
Check TOP and RIGHT final
position switch for correct
function and position.
Check pneumatics for function
117 XML parameter
The parameters in the XML file
are not correct. Please contact your
responsible distributor.