KOHJ-H-01-EN1-1.7-15112021
13
3.3 Antistatic Medicase
®
hygiene cover
The antistatic Medicase
®
hygiene cover protects the mattress’ cells from liquid ingress
and prevents the build-up of static charge (surface resistance ≤ 105 Ω). The antistatic
cover is intended specifically for environments where the build-up of static charge may
pose a safety risk.
The surface of the cover is polyurethane and the lower layer is polyamide/elastane. The
cover can be removed using zippers on three sides.
There is a power cable conduit on the edge of the cover with power cable pre-installed.
The air tubes of the cells are routed out at the left corner of the cover at the foot end.
The integrated conduit prevents the power cable from being clamped by the sides of the
bed or run over by its wheels when moving the bed.
Do not place a power cable in the conduit if you believe the power
cable may be clamped by the sides or folding parts of the bed.
3.4 Rehab add-on for the cover
All covers are available with integrated Rehab side bars. The side support bars improve
the support of the support surface’s edge, promoting the patient’s independent getting
up from the bed and sitting down on it.
• There are dedicated hygiene covers for the side bars.
• Side bars are available in one-side and two-side configurations. In the one-side con
-
figuration, the side of the bar can be changed as necessary.
• Make sure that the side support bar is correctly positioned in such a way that its
wedge at the foot end has the sloped part up.
Wedged side support bar of the Rehab add-on.
When using Rehab add-on for the cover, make sure the patient is
always lying on the cells, not on the side supports.
3.5 Comfort add-on for the Medicase
®
hygiene cover
The Comfort cover is the Medicase
®
hygiene cover plus a detachable cotton top. The top
can be detached by undoing two zippers.
The Comfort option is not available for the Mediresc
™
rescue cover or the antistatic Medi-
case
®
hygiene cover.
